Cámara climática con sistema FITOTRON para cultivos y entomología con control de humedad e iluminación led

EGCS ALG PRO

EGCS ALG PROLine

Climate chamber for algae cultivation with horizontal or vertical air flow.

Additional information

Gross capacity (liters)

193, 353, 403, 503, 603, 703, 753, 853, 1203, 1503, 1803, 2203, 2803, 2903, 3503

Configurable parameters

Air flow, CO2, Humidity Control, LED Lighting, Temperature Control

GENERAL SPECIFICATIONS


 
  • Designed for the study of growth of all types of Algae, Cyanobacteria, Microalgae, Algae Toxicity, Zebra Fish, Aquaculture, Daphinia and marine studies with different production capacities.
  • Uniform vertical or horizontal air flow on all shelves, with speed regulation approx. 0.2 – 0.8m/s.
  • TEMPERATURE CONTROL EGCHS LED y  EGCVS LED MODELS Temperature range from +8ºC to +55ºC, with lights on/off.
  • TEMPERATURE AND HUMIDITY CONTROL EGCHS HR LED y  EGCVS HR LED MODELS Humidity control: Working range from 30% to 98% R.H (+/- 3%). With lights off and on.
 

TECHNICAL SPECIFICATIONS


 

  • Temperature control panel and other parameters with 7.0 “TFT touch screen.
  • Ultrasonic humidity generator and horizontal airflow recirculation system. (EGCS ALG  HR)
  • Safety thermostat, avoids exceeding the temperature.
  • Electronic probe to measure humidity (4-20 mA) with precision / stability of +/- 3%.

 

TECHNICAL SPECIFICATIONS OF THE LIGHTS


 

  • Possible light positions: on door (LED), on door and rear (2S) or on trays (1/2/3/4 L).
  • 2 independent LED light channels with one-to-one regulation: Channel 1 warm white light. Channel 2 cool white light.
  • Light intensity control from 5 to 180 μMol/m² x s PAR. Optionally up to 1,800 μMol/m² x s.

CONTROL


  • 4500 series controller, with graphical temperature and/or humidity display, intuitive and simple user control.
  • 7.0″ TFT backlit graphic display.
  • Acoustic and visual alarm.
  • 3 levels of numerical password protection (user, supervisor, technical service), with reprogrammable PIN codes.
  • Back-up battery, with automatic recharge, guaranteeing autonomy for 48 or 72 hours.

CONSTRUCTION


 

  EXTERIOR   Epoxy coated steel. 4 wheels and height-adjustable feet.
  INTERIOR   AISI304 stainless. Rounded corners and interior drainage.
  DOOR   Blind door with handle and key lock. 6mm thermal glass internal door.
  POWER   220-240V /1 F/ 50 Hz. 1.5 m cable with Schuko connector.
  ISOLATION   60mm CFC-free high-pressure injected polyurethane. Density of 40 kg/m3.
  SHELVES   In stainless steel. perforated + height-adjustable guides. Max load 100 kg/m2.
  COOLING   Forced air ventilation. Cold control controlled by solenoid valve.

OPTIONAL ACCESORIES


 

  • Tubes in interior trays independently regulated at each level, with the possibility of regulating light intensity, via the microprocessor.
  • Daylight tubes for algae growth.
  • Day growth tubes for plant growth.
  • LED tubes with different day growth LED diode configurations for plant growth according to different applications.
  • Lights on the sides or rear of the chamber, with protected glass window.
  • UV light tube for sterilization.
  • Thermal decontamination system at +70 °C.
  • Bio-decontamination with hydrogen peroxide allows the connection of an H2 O2 atomizer system.
  • Optional negative temperatures: +4ºC/ 0ºC / -5ºC /-10ºC /-20ºC / -30ºC / +70ºC / +80ºC
  • Extended drying capacity up to +10% RH, with additional air dryer.
  • Water cooled condensing unit.
  • CO2 control and supervision units.
  • CO2 scrubber to reduce carbon dioxide below ambient levels.
  • Fog or spray simulation.
  • Automatic irrigation valve.
  • Phenolic resin coating for entomology/insect breeding applications.
  • 20 liter external water tank with electric pump and safety valve for the humidifier feed water.
  • Continuous demineralization system for the humidifier feed water.
  • Digital printer for temperature and/or humidity.
  • Potential-free output for remote alarm control (4-20 mA).
  • RS485/232 remote communication system.
  • Additional grommet for cables and tubes.
  • Internal sockets.
  • Ethernet output for remote connection via WiFi network and dedicated website, makes it possible to read and change parameters.
  • GSM alarm module.
  • Communication software for PC on request.
  • 7-day circular temperature/humidity recorder, with independent battery to work even in case of power failure. Includes 100 charts (approx. for 1.5 years).
  • Additional data loggers.
  • Aeration kit for algae research and hydroponic crops.

UNDERSTANDING THE NAME OF THE MODEL



EGCS ALG

E – Equitec     G – Growth / Crecimiento     C – Chamber / Cámara.     S – Screen / con Pantalla     ALG – Algae

H – Horizontal / Flujo Horizontal.    V – Vertical / Flujo Vertical.    LED – Luces LED.

LinkedIn
WhatsApp
Twitter
INQUIRIES FORM

REQUEST INFORMATION

Send us your inquiry about this product.

EGCS ALG PRO

Cámara climática con sistema FITOTRON para cultivos y entomología con control de humedad e iluminación led